![]() ![]() Warning: The app we are using works as advertised, but it's a third-party tool, and you should use it only at your own risk. You may also be able to wake a device through the WoL feature built into the router. You can use virtually any third-party application for Windows, Linux, Mac, mobile apps for Android and iPhone, or custom scripts to send a magic wake-up packet. Also, you may want to disable the feature inside the firmware. You can always disable the WoL feature using the same instructions mentioned above but on step 9, make sure to disable the option and other settings you may have selected. The settings needed to activate Wake-on-LAN in the BIOS/UEFI can differ significantly and should be looked up specifically for the device on the system manufacturer's website.After you complete the steps, you can proceed with the instructions to use a third-party tool or script to send a wake-up packet over the network to the device you want to start. It is likely that specific settings have to be changed in the systems BIOS/UEFI, this should only be done by an experienced system administrator. Wake-over-WiFi needs the same setup in the BIOS/UEFI and a WiFi Router that supports it.For desktops: Towards the center of the window under Computer sleep and Display sleep sliders, check the "Wake for Network access" box.For laptops: Select "Power Adapter" tab, check "Wake for Wi-Fi network access" box (your Wi-Fi router needs to support this feature).Click on "Energy Saver" located at the second row of icons.Uncheck the option "Turn on fast startup".Set “Allow this device to wake the computer” and “Only allow a magic packet to wake the computer” to enabled.Scroll down in the list to find “Wake on Magic Packet”.Right mouse click on the network card and go to Properties.Find Power Management menu and Wake-On-LAN option there.Enter BIOS Settings at the startup of your PC (usually by pressing Del or F1).These are settings specific to the operating system in use, e.g. The device can only be woken up if at least one of the devices in the list is online. Using this option, AnyDesk will automatically ping random AnyDesk clients on the same direct local area network as the device to be woken up and request them to send a wake-up packet to the target device.Įnabled, but wake your device using the following desks onlyĪnyDesk ID(s) from devices in the local network can be set up here. AnyDesk Wake-on-Lan settings DisabledĪctivated by default. The operating system settings need to be set up properly and lastly, Wake-on-Lan has to be enabled in the motherboards BIOS/UEFI settings. Wake-On-LAN has to be enabled in the remote AnyDesk client's settings, Hybrid shutdown (Default for Win 8, 8.1, 10).Shutdown (S5 Power State, default for Windows 7).Please see How to set up Wake-on-LAN for a detailed description of the available settings.ĪnyDesk wakes devices that are in the following modes: Once the device has woken up, AnyDesk will automatically connect to it. ![]() ![]() If you send a "Power on" request from L to R, our AnyDesk servers will look for online clients in network B such as W and request that it sends a wake-up packet from the device hosting W to the device hosting R. The powered-off or asleep remote client R on network B.Īn awake and online remote client W on network B. If everything has been set up accordingly, pressing “Power on” will start the wake-up process of the sleeping device assuming there is an online AnyDesk client on the same network as the device you are trying to wake up.įor example, in the situation with the following: ![]() When connecting to an offline client, AnyDesk will show a prompt to “Power on” the sleeping device. Administrator Privileges and Elevation (UAC)ĪnyDesk for Linux / Raspberry Pi / FreeBSDĬaution: Please contact your hardware manufacturer to see if your hardware supports Wake-On-LAN. ![]()
0 Comments
Leave a Reply. |